LOOOOONG story short, I killed my HBA. I have a spare so I popped it in, and now I’m getting
Not sure why, but that’s why I am getting. I hit a key and go into the config, then click on the LSI Driver listed and then I get
I can’t do anything with the keyboard here. The only thing I CAN do is to hit Default, so I do, then save changes and it tells me it’s ok now.
I exit out and it takes me back to this screen
I can’t get past it. If I turn it off and back on, it goes to the first screen. I’m stuck in a loop and have no idea what to do!
Here’s a possibility: In the lifecycle controller, there’s a place to reset the machine to factory defaults. I suppose I should say that it will clear EVERYTHING. Do not do this if you’re tryina save data/configs. But if you’re at last resort and don’t care about data/configs, this has helped me in the past.
https://www.dell.com/support/manuals/en-us/dell-lifecycle-cntrler-2-rel-v1.4.0/lc2 1.4.0 gui ug/deleting-configuration-and-resetting-defaults?guid=guid-ceeed1e9-b730-4530-96fc-c9d5f5b5f8f7&lang=en-us