Hi,

Q1: Inside my smart panel, it says 568A instructions, so I should be using that when I punch down my ethernet runs into the patch panel, right? Photo attached of the sticker inside the panel. Photo 1. House was built in 2005/06 and we used to have landlines if that information is relevant.

Q2: Leviton patch panel and it has colors like teal/yellow, which that’s green and orange, right? Am I colorblind or are the colors on the Leviton guide slightly off from the actual wire colors? Photo of the guide on the patch panel attached. Photo 2.

https://preview.redd.it/e97ydzqzlm2c1.jpg?width=3024&format=pjpg&auto=webp&s=520e8fee22c483dee3b866fad44d4c71943f1148

https://preview.redd.it/l403nzqzlm2c1.jpg?width=3024&format=pjpg&auto=webp&s=76d1cd0ddeb34a74f70787ba08c3d9d86a28cfd1

Thanks!

​

  • mysterytoy2@alien.topBEnglish
    1·
    1 year ago

    I would recommend using the same one I used but I can’t remember. Doesn’t matter. Just be consistent in the entire property. Makes it easier to trace things later on. If you punch them down nicely then that day will never come.

  • skizzerz1@alien.top
    BEnglish
    11·
    1 year ago

    If you already started with B then stick with B and ignore what the panel says. If the panel is pre-marked with A color coding and you want to do B then swap green and orange compared to what the chart says.